Startech Docking Station Not Working. We have even tested using startech brand cables and it still isnt working. Press the windows key + r, type devmgmt.msc, and press enter to open device manager.
Universal Docking Stations
If you do not see the usb video adapter in device manager, refer to the. Disconnect the docking station from your pc. Web you could then close the laptop screen and continue working but whenever the laptop is turned off or undocked it would need to have the screen open in order to identify the monitors. Once windows has restarted, connect the docking station to your computer. The blue power light switches from blue/red to blue indicating that the drive is functioning and is seen by the docking station so i can't think of what else might be happening, unless the docking station has just gone bad for some reason. Installation may take several seconds to complete. Web when you test the video cables, video source, video destination, and laptop docking station it is recommended that you do the following: Press the windows key + r, type devmgmt.msc, and press enter to open device manager. Unplug the docking station from your pc. We tried 3 different docks on 3 different laptops with the same results.
Press the windows key + r, type devmgmt.msc, and press enter to open device manager. When you test the video cables, video source, video destination, and laptop docking station it is recommended that you do the following: Web connect any video cables from your display (s) to the video port (s) on the docking station. Press the windows key + r, type devmgmt.msc, and press enter to open device manager. However, the light in the mouse is on indicating that it is still drawing power. Web you could then close the laptop screen and continue working but whenever the laptop is turned off or undocked it would need to have the screen open in order to identify the monitors. Although when plugged in separately, both usb mouse and keyboard work properly but when plugged in together, the mouse stops working. Press the windows key + r, type devmgmt.msc, and press enter to open device manager. Web per the startech website, no drivers are needed for this device, which i guessed anyway. Installation may take several seconds to complete. Web the only way the montitors work correctly is if both montiors are displayport to displayport this causes an issue cause only about 1 station in 15 has both montiors with a displayport input, and we have about 300 docks to put on the floor.
