The Most Memorable Audio Receivers of the Last 50 Years Audioholics
Pioneer Receiver No Sound. I plugged in headphones and there was some sound but it wasn't very loud, even on full volume. Ensure that all plugs are firmly seated in their respective sockets because sometimes a plug can slip out halfway and not draw power.
The Most Memorable Audio Receivers of the Last 50 Years Audioholics
Sometimes the potentiometer causes the no sound issue as well. Web be careful how you open it, or it will never look the same. I did have a party about a week before they stopped working but the volume wasn't dangerously loud. In most cases, resetting the device solves the problem. Ensure that all plugs are firmly seated in their respective sockets because sometimes a plug can slip out halfway and not draw power. I recently attempted to install my pioneer car stereo into my 99 jetta. At this point, the stereo doesn't send any signal to the speakers. The way to remove the corrosion is to burnish both the wiper and the resistor face with emery cloth. It will power up fine, and i have checked to make sure that the speaker wires are not touching eachother, etc. Web the receiver turns on but no sound comes out of the speakers.
It will power up fine, and i have checked to make sure that the speaker wires are not touching eachother, etc. Looking closely, there was an exposed wire that had come in contact with the stereo's outer casing. Check the signal sel button on the remote or the #5 button. Web why does my pioneer stereo not produce any sound? Web be careful how you open it, or it will never look the same. Web one immediate reason your pioneer receiver has no sound is a faulty source device. Web i had this receiver a couple years ago and had similar issues with no sound output. Web the receiver turns on but no sound comes out of the speakers. Ensure that all plugs are firmly seated in their respective sockets because sometimes a plug can slip out halfway and not draw power. I did have a party about a week before they stopped working but the volume wasn't dangerously loud. There is a wiper arm that is moved across a series of ridges, which is just resistive wire wound around a core.
